Protech Systems BA-2501 User Manual Download Page 102

Page: 102 / 146

Chapter 5 BIOS Setup

BA-2501 SERIES USER MANUAL

Page: 5-25

Smart Fan Mode Configuration

Menu Path

Advanced > Hardware Monitor > Smart Fan Mode

Configuration

Smart Fan Mode Configuration Screen

BIOS Setting

Options

Description/Purpose

CPU Fan Smart Fan Control - Manual Duty Mode

- Auto Duty-Cycle

Mode

Smart Fan Mode select for CPU Fan.

Manual Duty Mode

Numeric (from 1 to 100) Manual mode fan control, user can

write expected duty cycle (PWM fan

type) 1-100.

System Fan Smart Fan

Control

- Manual Duty Mode

- Auto Duty-Cycle

Mode

Smart Fan Mode select for System

Fan.

Manual Duty Mode

Numeric (from 1 to 100) Manual mode fan control, user can

write expected duty cycle (PWM fan

type) 1-100.

Summary of Contents for BA-2501



















































































































































Search results

Summary of Contents for BA-2501

Reviews:

Related manuals for BA-2501

Brands by name

Popular brands

Protech Systems BA-2501, User Manual

Search results

Summary of Contents for BA-2501

Reviews:

Related manuals for BA-2501

Brands by name

Popular brands