Appendix A Technical Summary
BA-2501 SERIES USER MANUAL
Page: A-19
III.
BIOS Update Procedure
1
Boot into EFI Shell, change to the path where you put BIOS
image and AFUEFIx64.
Shell> fs0:
fs0:\> cd afuefix64
2
"
AFUEFIx64 25010Pxx.bin /p /b /n /x”
and press enter to start
the flash procedure. (xx means the BIOS revision part, e.g.
W2…)
3
During the update procedure, you will see the BIOS update
process status and its execution percentage. Beware! Do not turn
off the system power or reset your computer if the whole
procedure are not complete yet, or it may crash the BIOS ROM
and the system will be unable to boot up next time.
4
After the BIOS update procedure is completed, the following
messages will be shown:
5
Restart the system and boot up with the new BIOS
configurations.
6
The BIOS Update is completed after the system is restarted.
