Protech Systems BA-2501 User Manual Download Page 123

Page: 123 / 146

Chapter 5 BIOS Setup

BA-2501 SERIES USER MANUAL

Page: 5-46

BIOS Setting

Options

Description/Purpose

Boot Option #1~#n

- [Drive(s)]

- Disabled

Sets the system boot order.

CSM Configuration

Sub-Menu

CSM configuration: Enable/Disable,

Option ROM execution settings, etc.

5.7.1 Boot – CSM Configuration

Menu Path

Boot > CSM Configuration

The

CSM Configuration

provides advanced CSM (Compatibility Support Module)

configurations such as Enable/Disable CSM Support, configure Option ROM

execution, boot option filter, etc.

CSM Configuration Screen

BIOS Setting

Options

Description/Purpose

CSM Support

- Disabled

- Enabled

Enables or Disables CSM Support.

CSM16 Module

No changeable options Displays the CSM 16 Module

version.

Boot option filter

- UEFI and Legacy

- Legacy only

This option controls Legacy/UEFI

ROMs priority.

Summary of Contents for BA-2501



















































































































































Search results

Summary of Contents for BA-2501

Reviews:

Related manuals for BA-2501

Brands by name

Popular brands

Protech Systems BA-2501, User Manual

Search results

Summary of Contents for BA-2501

Reviews:

Related manuals for BA-2501

Brands by name

Popular brands