Protec TC-512A, Installation, Operation & Maintenance Manual

Page: 22 / 26

22-26
remove it, you can move the upper rim of tire to the dismounting head.
2). Help crowbar to get the upper side of tire out
If the upper side of tire is too hard to get out, you can use tire press lump to press the
upper side rim of tire of the opposite side into the groove, and then get the upper side
of tire.
3). Help hold the lower part of tire up If the lower part of tire is too hard to be moved
up, you can use disk to hold the tire up and rotate the tire, then the downside of tire
can be hold to the surface of the rim, you can insert a shaft to dismantle the rim of
the tire. (Figure 6-3)