Protec TC-512A, Installation, Operation & Maintenance Manual

Page: 14 / 26

14-26
9. Moving
Move the tire changer you need a fork-lift truck.
Disconnect the pneumatic and electric power supplies.
Apply leverage to one side of the base so as to raise it slightly from the floor,Insert
the forks of the truck under the base and slide the tire changer onto them.
Set the tire changer down in its new position.
10. Storage
In the event of storage for long periods of time, make sure to disconnect all sources
of power and grease the clamp sliding guides on the turntable to prevent from
oxidizing.
11. Scrapping
If you decide scrape the machine, be sure to make it inoperative bydisconnecting it
from all sources of power.
Remove all non-ferrous materials and dispose of them as prescribed bynational law.
Collect the oil and dispose of it at an authorized point as prescribed bynational law.
Scrape the rest ferrous material.
12. Maintenance
1) General warning
Unauthorized personnel may not carry out maintenance work.
Regular maintenance as described in the instructions is essential for correct
operation and long lifetime of the tire changer.