48
www.pro-team.com 866.888.2168
Stub Tube Replacement
Insert the connected stub tube
and plastic adapter into handle.
Align ridge on stub tube with
groove in handle.
4.
Make sure copper strips on
hose are making contact with
the copper relays on the control
board.
5.
2.
Remove stub tube from top
half of hose handle.
1.
Remove eight Phillips screws
from hose handle then
remove top half of housing.
Tools needed: Phillips Head Screw Driver (not included in kit).
Replace top half of hose
handle and tighten screws. Follow
numbered screws above to make
tightening easy.
6.
Insert hose handle into upper section of wand. Connect hose
handle power plug with the powerhead’s power plug.
7.
Remove stub tube from plastic
adapter by pressing button and
sliding apart. Insert NEW stub tube.
Make sure to lock button in place.
3.
7
2
5
1
6
4
8
3
