12
www.pro-team.com 866.888.2168
Remove Vacuum Receptacle
REMOVE VACUUM RECEPTACLE
1. Remove Charger Panel
(Page 4)
2. Remove Vacuum Panel
(Page 8)
3. Remove Diffuser
(Page 10)
Inside vacuum locate and remove top horizontal
connector on battery control module (BCM) (white
wire from receptacle) with needlenose pliers.
4.
Locate black wire with white connector from receptacle
on BCM and remove with needlenose pliers.
5.
Remove two screws holding receptacle to vacuum
body with Philip’s screwdriver.
6.
Using fingers or flathead screwdriver, loosen
receptacle from vacuum.
7.
Remove receptacle from vacuum.
8.
