PROSPOTfitness Fusion SSG Owner'S Manual Download Page 13

!!Read!!  

This Page Before Using Your 

SSG 

 

 

1.

 

CAUTION: 

This machine involves the risk of possible injury by its user. 
 
 

2.            THE  FOLLOWING RULES SHOULD BE CARFULLY 

FOLLOWED

 

Consult a physician or other healthcare provider before 
beginning an exercise program.   

 

If you are in bad health or are handicapped, ask for the 
opinion of your physician and exercise only under qualified 
supervision.   

 

Discontinue exercising if you experience any light-
headedness, dizziness or shortness of breath and consult 
your physician. 

 
 

3.       Keep small children and others at a safe distance from all moving 

parts.  The up and down movement of the weights can be 
dangerous.   

 

Never allow your fingers, toes, hair, other body parts or loose 
clothing to come near weights while they are in motion.   

 

Never attempt to exercise with more weight than you are 
physically able to handle.   

 

Prior to every use, inspect your machine to ensure all parts are 
free from defect and are fully operational.   

 

Check all fasteners to make sure none have loosened with use.  
Tighten any loose fasteners if necessary.  

 
 
4.       

Warning:

 Never perform any maintenance on the unit while the 

power supply is plugged into the wall.  

 

 
 

 
 

Page 13 

Summary of Contents for Fusion SSG























Reviews: