Reference
MVI56E-MNETCR ♦ ControlLogix Platform
User Manual
Modbus TCP/IP Multi-Client Enhanced Communications Module for Remote Chassis
Page 154 of 161
ProSoft Technology, Inc.
5.8.4 Downloading the Sample Program to the Processor
To download the sample program from RSLogix 5000 to the ControlLogix
processor
Note: The key switch on the front of the ControlLogix module must be in the REM
position.
1
If you are not already online to the processor, open the
C
OMMUNICATIONS
menu, and then choose
D
OWNLOAD
.
RSLogix will establish communication
with the processor.
2
When communication is established, RSLogix will open a confirmation dialog
box. Click the
D
OWNLOAD
button to transfer the sample program to the
processor.
3
RSLogix will compile the program and transfer it to the processor. This
process may take a few minutes.
4
When the download is complete, RSLogix will open another confirmation
dialog box. Click
OK
to switch the processor from PROGRAM mode to RUN
mode.
Note: If you receive an error message during these steps, refer to your RSLogix documentation to
interpret and correct the error.
5.8.5 Adding the Sample Ladder to an Existing Application
1
Copy the Controller Tags (page 76) from the sample program.
2
Copy the User-Defined Data Types (page 77) from the sample program.
3
Copy the Ladder Rungs from the sample program.
4
Save and Download (page 38, page 154) the new application to the controller
and place the processor in RUN mode.
Summary of Contents for MVI56E-MNETCR
Page 4: ......
