ProSoft MVI56E-MNETCR, User Manual

Page: 119 / 161

MVI56E-MNETCR ♦ ControlLogix Platform Reference
Modbus TCP/IP Multi-Client Enhanced Communications Module for Remote Chassis User Manual
ProSoft Technology, Inc. Page 119 of 161
Block Request from Processor to Module
Word Offset Description Length
0 9998 1
1 to 41 Spare 41
The module does not send a response block for this command.
Cold Boot Block (9999)
This block is equivalent to performing a hardware reset, and causes the module
to restart in the same way as if the power was cycled. The Cold Boot control
block also reloads the module's backplane and application port drivers, restarts
the program, and resets all internal registers to zero.
Note: In some cases, the read section of the module database (transferred from module to
processor) must keep its values after a reboot. To repopulate the module's registers with the last
values the module sent to the processor, set the Initialize Output Data parameter in the module
configuration to Y
ES
.
Block Request from Processor to Module
Word Offset Description Length
0 9999 1
1 to 41 Spare 41
The module does not send a response block for this command.