ProSoft Technology RadioLinx RLXIB-IH2N, User Manual, Page: 78 / 171

Share

Page: 78 / 171

ProSoft Technology RadioLinx RLXIB-IH2N User Manual Download Page 78

RadioLinx Configuration Manager

RLXIB-IHN

♦

802.11n

User Manual

Industrial Hotspot

Page 78 of 171

ProSoft Technology, Inc.

May 23, 2011

4.2.9 IGMP / Multicast Configuration

The device can be configured to ensure multicast traffic is sent out as directed
packets over the 802.11 network.
RLXIB-IHN radios support IGMP v1 and v2. The default operation of the RLXIB-
IHN radios is to have IGMP functionality enabled. Use this page to specify
settings associated with IGMP filtering and snooping.
Unknown multicast addresses can be sent to all ports (flood) or to none (filtered)
by selecting the Multicast Filtering option. You can also specify whether the radio
will generate IGMP queries, and configure the query interval time.
By RFC specification, only one device on a network should generate IGMP
queries. As such, RLXIB-IHW radios will only send a query if another device has
not sent a query within its Query Interval setting, even if Query Generation is
enabled.

Parameter Description

Multicast Filtering

Use the dropdown menu to enable or disable Multicast filtering support
on this device. Disabling filtering will cause the radio to flood multicast
packets to all ports.

IGMP Query Generation

Use the dropdown menu to enable or disable IGMP query generation
from this device.

IGMP Query Interval

Number of seconds between queries (if not pre-emptied by another
devices queries).

Broadcast Threshold

This is the number of interested clients (default is 10) for a multicast
group beyond which multicast packets are sent as multiple (3)
broadcasts instead of individually directed packets.

Multicast Stale Timeout

Number of queries generated before a device is removed from the
multicast group on this radio if no response is received (default 3). This
is applicable only to dynamically created multicast memberships.

Click

Apply

to save your changes.

Click

Clear

to discard your changes.

«
...
76
77
78
79
80
...
»

Summary of Contents for RadioLinx RLXIB-IH2N












































































































































































Reviews:

No comments