S3964R
♦
ProLinx Gateway
Diagnostics and Troubleshooting
Siemens 3964R Protocol
Driver Manual
Page 32 of 64
ProSoft Technology, Inc.
April 14, 2009
Keystrokes
The keyboard commands on these menus are almost always non-case sensitive.
You can enter most commands in lower case or capital letters.
The menus use a few special characters (
[?],
[-],
[+],
[@]
) that must be entered
exactly as shown. Some of these characters will require you to use the
[S
HIFT
],
[C
TRL
]
or
[A
LT
]
keys to enter them correctly. For example, on US English
keyboards, enter the
[?]
command as
[S
HIFT
][/].
Also, take care to distinguish capital letter
[I]
from lower case letter
[
L
]
(L) and
number
[1];
likewise for capital letter
[O]
and number
[0].
Although these
characters look nearly the same on the screen, they perform different actions on
the module.
4.1.2 Main
Menu
When you first connect to the module from your computer, your terminal screen
will be blank. To activate the main menu, press the
[?]
key on your computer's
keyboard. If the module is connected properly, the following menu will appear on
your terminal screen:
Caution:
Some of the commands available to you from this menu are designed for advanced
debugging and system testing only, and can cause the module to stop communicating with the
processor or with other devices, resulting in potential data loss or other failures. Only use these
commands if you are specifically directed to do so by ProSoft Technology Technical Support staff.
Some of these command keys are not listed on the menu, but are active nevertheless. Please be
careful when pressing keys so that you do not accidentally execute an unwanted command.
Redisplaying the Menu
Press
[?]
to display the current menu. Use this command when you are looking
at a screen of data, and want to view the menu choices available to you.
