S3964R
♦
ProLinx Gateway
Configure the Gateway
Siemens 3964R Protocol
Driver Manual
Page 20 of 64
ProSoft Technology, Inc.
April 14, 2009
From Address
0 to highest Status Data address
This field specifies the internal database register to copy from. This address can
range from the Data area as well as the Status Data Area of the product. Refer to
the
ProLinx Reference Guide
for the data and status registers for each protocol.
To Address
0 to 3999
The destination for the copy is always within the Register Data area. Take care to
specify a destination address that will not overwrite data that may be required for
other purposes.
Register Count
1 to 100
This parameter specifies the number of registers to copy.
Swap Code
0 = No Change
1 = Word Swap
2 = Word and Byte Swap
3 = Byte Swap
You may need to swap the order of the bytes in the registers during the copy
process in order to change the alignment of bytes between dissimilar protocols.
This parameter is helpful when dealing with floating-point or other multi-register
values, as there is no standard method of storage of these data types in slave
devices.
