Diagnostics and Troubleshooting
ProLinx DNPS
♦
ProLinx Gateway
User Manual
DNP 3.0 Slave
ProSoft Technology, Inc.
Page 33 of 86
December 1, 2009
This action opens the
D
IAGNOSTICS
dialog box.
3
Press
[?]
to open the Main Menu.
Important:
The illustrations of configuration/debug menus in this section are intended as a general
guide, and may not exactly match the configuration/debug menus in your own module.
If there is no response from the module, follow these steps:
1
Click to configure the connection. On the Connection Setup dialog box, select
a valid com port or other connection type supported by the gateway.
2
Verify that the null modem cable is connected properly between your
computer’s serial port and the module. A regular serial cable will not work.
3
On computers with more than one serial port, verify that your communication
program is connected to the same port that is connected to the module.
