manualshive.com logo in svg

ProSoft Technology inRAx MVI46-N2, User Manual

Share
Download
ProSoft Technology inRAx MVI46-N2 User Manual Download Page 9

Start Here 

MVI46-N2 

♦

 SLC Platform 

 

Johnson Controls N2 Communication Module 

 

ProSoft Technology, Inc. 

Page 9 of 68 

October 27, 2008 
 

1 Start 

Here 

In This Chapter 

™

 System 

Requirements ............................................................................. 9 

™

 Package 

Contents ................................................................................. 10 

™

  Install ProSoft Configuration Builder Software....................................... 11 

™

 Setting 

Jumpers .................................................................................... 12 

™

  Install the Module in the Rack ............................................................... 13 

™

  Connect your PC to the Processor ........................................................ 14 

™

  Download the Sample Program to the Processor.................................. 15 

™

  Connect your PC to the Module ............................................................ 18 

Installing the MVI46-N2 module requires a reasonable working knowledge of the 
Rockwell Automation hardware, the MVI46-N2 Module and the application in 
which they will be used. 

Caution: 

It is important that those responsible for implementation can complete the 

application without exposing personnel, or equipment, to unsafe or inappropriate working 
conditions. Safety, quality and experience are key factors in a successful installation. 

 

 

1.1 System 

Requirements 

The MVI46-N2 module requires the following minimum hardware and software 
components: 

ƒ

  Rockwell Automation SLC 5/02 M0/M1 capable processors (or newer), with 

compatible power supply and one free slot in the rack, for the MVI46-N2 
module. The module requires 800mA of available power.  

ƒ

  Rockwell Automation RSLogix 500 programming software. 

ƒ

  Rockwell Automation RSLinx communication software 

ƒ

  Pentium® II 500 MHz minimum. Pentium III 733 MHz (or better) 

recommended  

ƒ

  Supported operating systems: 

o

 

Microsoft® Windows 98  

o

 

Windows NT® (version 4 with SP4 or higher)  

o

 

Windows 2000  

o

 

Windows XP  

ƒ

  32 Mbytes of RAM minimum, 64 Mbytes of RAM recommended  

ƒ

  50 Mbytes of free hard disk space (or more based on application 

requirements)  

Summary of Contents for inRAx MVI46-N2





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands