Module Configuration
MVI46-N2
♦
SLC Platform
Johnson Controls N2 Communication Module
ProSoft Technology, Inc.
Page 19 of 68
October 27, 2008
2 Module
Configuration
In This Chapter
Configuring the Module ................................................... 19
Data .......................................................................................... 21
Configuration Builder ................................................................ 21
Project to the Module...................................................... 27
This section contains the setup procedure, data, and ladder logic requirements
for successful application of the MVI46-N2 module. Each step in the setup
procedure is defined in order to simplify the use of the module.
The section also contains a discussion of the data object defined for the module.
This single object completely encapsulates all the data required for module
operation. It is important to understand each element of the object for proper
application of the module.
The ladder logic requirement section defines the minimum ladder logic required
to apply the module in a user application. The logic is simple to understand and
implement.
2.1 Installing
and
Configuring the Module
This chapter describes how to install and configure the module to work with your
application. The configuration process consists of the following steps.
1
Use RSLogix to identify the module to the processor and add the module to a
project.
Note:
The RSLogix software must be in "offline" mode to add the module to a project.
2
Modify the example ladder logic to meet the needs of your application, and
copy the ladder logic to the processor. Example ladder logic files are provided
on the CD-ROM.
Note:
If you are installing this module in an existing application, you can copy the necessary
elements from the example ladder logic into your application.
The rest of this chapter describes these steps in more detail.
