background image

 Page 11 of 11

MAINTENANCE

• 

Check accessory is securely attached whenever you refit it to the vehicle. If the unit feels 
loose, refer to the fitting instructions and readjust.

• 

Regularly check all fasteners. This includes all attached accessories and roof racks.

• 

Only use water and a soft sponge to clean your awning, you may use mild soapy water for 
stubborn marks. Be sure to rinse thoroughly with clean water and to let dry before storage.

• 

Do not store the awning in the PVC bag while it is wet for long periods of time. This will 
help prevent mildew from forming on the canvas.

CAUTION

• 

Always secure the awning with pegs and guy ropes. Do not use awning in excessively 
windy conditions.

• 

A loaded roof rack system can alter the performance of your vehicle. Be especially aware 
of the effects of side winds, changing of direction, and braking performance. Avoid rapid 
acceleration and deceleration. Drive Carefully.

• 

Never drive into a car wash with the roof rack system or accessories fitted.

• 

Do not exceed the vehicle manufacturer’s roof load rating. Total load equals weight of roof 
racks + acces cargo/equipment.

• 

The speed driven must be suited to the load transported and to official speed limits.

• 

Any changes made to the roof racks and accessory racks as well as the use of spare parts 
or accessories other than those supplied by the manufacturer will lead to the lapsing of 
the manufacturer’s warranty and liability for any material damage or accidents. You should 
observe these instructions to the letter and only use the original parts supplied.

WARRANTY & DISCLAIMER

Yakima Australia Pty Ltd ABN 58 154 440 221

17 Hinkler Court, Brendale QLD 4500

Tel: 0800 4776 722 (NZ) or 1800 143 548 (AU)

Email: [email protected] or [email protected]

1.   Where the product is supplied to the customer for other than business purposes within the meaning of section 43 of the 

New Zealand Consumer Guarantees Act 1993, the provisions of that Act shall apply. It is important that anyone who 

fits or uses this product does so in accordance with the manufacturer’s instructions. 

2.  Where the product is supplied to the customer for business purposes within the meaning of section 43 of the New Zealand 

Consumer Guarantees Act 1993, the provisions of that Act and all other representations or terms (including any conditions 

or warranty expressed or implied by law, statute or otherwise) not expressly included in this leaflet are hereby expressly 

excluded shall have no effect and the clauses (a) and (b) shall apply. 

3.  Subject to the 

Additional Information (Australia)

, where the product is supplied and purchased in Australia, the following 

shall apply: 

(a).  THE SUPPLIER WARRANTS the product to be free from defects in materials and/or workmanship for a period of three (3) 

years from the date of original purchase (the warranty period). Proof of purchase is required. Subject to the limitations 

and exclusions set out below, the Supplier hereby agrees to remedy any defects in materials or workmanship becoming 

apparent during the warranty period, by replacing or repairing any defective product or component (at its option) free of 

charge to the purchaser in respect of replacement parts or labour. Any defective product or component must be notified 

and where practicable, returned at the purchaser’s expense to the Supplier immediately upon discovery of the alleged 

defect and no attempt made on the part of the purchaser to repair it. 

(b).  EXCEPTIONS, EXCLUSIONS AND LIMITATIONS TO WARRANTY.  The product and/or its components must be 

fitted/assembled and loaded in accordance with the Supplier’s written instructions and any requirements set out 

in the car’s owner manual. This warranty does not cover defects, loss or damage resulting from circumstances 

beyond the Supplier’s control including, but not limited to misuse, overloading, or failure to assemble and/or fit 

the product or component in accordance with the Supplier’s written instructions. Nor does the warranty cover 

defects, loss or damage resulting from accidents, unlawful use of the vehicle or defects/inconsistencies in the 

vehicle on which the product or component is fitted. Liability for direct, indirect, special, punitive, incidental, 

exemplary, contractual or consequential damage or loss arising from defects, faulty materials or design 

omissions or negligence or workmanship in the product or its components is hereby expressly excluded subject 

to the following. Certain Commonwealth legislation, including the Competition and Consumer Act 2010 (Cth), 

and other State and Territorial legislation confers upon purchasers rights which cannot be excluded from or be 

restricted or modified by contract. Any conditions, guarantees and/or warranties implied by law and incapable 

of exclusion are deemed to be expressly incorporated herein. Nothing herein contained is intended nor shall be 

permitted to be inconsistent with any such conditions, guarantees and/or warranties. To the extent permitted by 

legislation all conditions, guarantees and/or warranties such as implied warranties which are capable of exclusion 

are hereby expressly excluded and negatived. 

ADDITIONAL INFORMATION ( AUSTRALIA )

This information should be read in conjunction with clauses (a) and (b). 

IMPORTANT LEGAL NOTICE

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a 

replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. 

You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure 

does not amount to a major failure. 
This warranty does not change or take away your rights under the Australian Consumer Law. Your right to claim under 

this policy for the benefits covered is in addition to other rights and remedies you have under the law in relation to the 

product. 
Where you become aware of defects in materials or of workmanship, and wish to make a claim under this warranty you 

must do the following for the warranty to be honoured by your Prorack dealer or Yakima Australia Pty Ltd ABN 58 154 

440 221 (Yakima):
1.  Make a claim as soon as practicable by contacting the Prorack dealer from whom you purchased the product, who 

will give you instructions on how to proceed.

2.  If you are unable to contact the Prorack dealer, or the dealer is not able to remedy the defect, you should contact 

Yakima as soon as practicable at:

 

Call:  

0800 4776 722 (NZ) or 1800 143 548 (AU)

 

Email: 

[email protected] or [email protected]

Alternately, you can write to Yakima at 17 Hinkler Court, Brendale QLD Australia 4500 in order to make a claim 

under your warranty. 

3.  Upon contacting Yakima directly, you should explain as fully as possible the defect.  A Yakima representative will 

provide you with appropriate instructions for returning the product together with a copy of the original purchase 

invoice or receipt to Yakima. 

4.  The costs and expenses associated with making a claim under your warranty including the costs of complying with 

those instructions and of returning the product to Yakima or the Prorack dealer will be borne by you.

Following receipt of the product and purchase invoice or receipt, Yakima or the Prorack dealer must inspect the product 

to determine whether the claim falls within the warranty.  If:

4.1  the claim falls within the warranty, Yakima will remedy any defects in materials or workmanship becoming 

apparent during the warranty period, by replacing or repairing any defective product or component (at its 

option) free of charge to the purchaser in respect of replacement parts or labour.

4.2  the claim does not fall within the warranty, Yakima will return the product to you at your expense.

Yakima Australia Pty Ltd
17 Hinkler Court, Brendale
QLD 4500, Australia

Freephone
AU: 1800 143 548 

www.prorack.com.au

NZ: 0800 4776 722 

www.prorack.co.nz

Summary of Contents for Voyager Shade Awning PR3215












Reviews: