background image

INSTALLATION

12

Requirements

Below you will find the minimum requirements for running Reason:

!

Note that these are the minimum requirements! You will benefit from a fast computer 
with lots of RAM, since this will allow you to use more devices at the same time.

Mac OS X

Intel Mac (multiple cores highly recommended)

2 GB RAM or more

DVD  drive

3 GB free hard disk space (program may use up to 20 GB scratch disk space)

Mac OS X 10.5.8 or later (10.6.3 or later together with Propellerhead Balance)

Monitor with at least 1024x768 resolution

CoreAudio compliant audio interface, such as Propellerhead Balance, or built-in audio 
hardware

Free USB port for Ignition Key hardware (a free USB2.0 port is necessary when using the 
Propellerhead Balance audio interface)

Internet connection for registration and Rack Extension installation

MIDI interface and a MIDI keyboard recommended

Windows

Intel Pentium 4/AMD Opteron or better (multiple cores highly recommended)

2 GB RAM or more

DVD  drive

3 GB free hard disk space (program may use up to 20 GB scratch disk space)

Windows XP (SP3), Vista or Windows 7

Monitor with at least 1024x768 resolution

Audio Interface with ASIO driver, such as Propellerhead Balance

Free USB port for Ignition Key hardware (a free USB2.0 port is necessary when using the 
Propellerhead Balance audio interface)

Internet connection for registration and Rack Extension installation

MIDI interface and a MIDI keyboard recommended

Summary of Contents for Reason



































Reviews: