24
Drive To
Tapping the
'Drive To'
button takes you to the
Select Place
menu. This allows you to set your end
point/destination. (See
Select Place
on page
35
) When an end point has been selected and a GPS signal received,
your route will be calculated automatically.
Plan Route
Tapping this button takes you to the
Plan Route
menu. From this menu you can plan a route with or without the
GPS connected. Once in the Plan Route menu, if you wish to plan the journey from the current position you do not
need to change the „Start‟ point. To change your start or end location, tap the
'Start or End'
button. You can also
add
„via‟ destinations by tapping the
„Add Via‟
button. This takes you to the
Select Place
screen, which has several
options for selecting a start or end point. If you wish to save a location as a favourite, just tap the star button next to
the locations name.
Browse Map
Tapping the
'Browse Map'
button will take you to the map screen. At the side of the screen are four buttons, the
first two are for adjustment of the map scale allowing you to
„
Zoom In‟
and
„
Zoom
Out‟
. It is also possible to pan
around the map by dragging the map across the screen using your finger or the stylus. Next there is the
Summary of Contents for PNN-200
Page 1: ...Navigation Software User Manual Models ProNav PNN 200 ProNav Europe PNN 200E ...
Page 38: ...38 The Drive Screen 3D map display is the default view 2D map display is optional ...
Page 39: ...39 Guide mode no mapping but with text instructions is optional ...
Page 52: ...52 Map Colour Scheme 2 Map Colour Scheme 3 ...