ProNav PNN-200, User Manual

Page: 34 / 60

34
You can select your locations using Town, Street, POI, Recent, Favourites or Postcode buttons, however the
Browse Map feature will not support a selection of a Multistop location. To keep adding more locations repeat this
process.
If once you have made your selections you wish to change any of the locations, just tap the relevant
„Via‟
button
next to the location you wish to change and select a new location. If you wish to delete a location in the list just tap
the
„Del Via‟
button and then tap the
„Via‟
button next to the location you wish to delete. The location will then be
removed from the list.
Once you have added three locations, you will need to use the up and down arrows on the right of the screen to
access the
„Add Via‟
and
„Del Via‟
buttons and to see other subsequent via locations you have added.
When you have finished entering all your locations, tap the
„
Options
‟ button to access the Plan Options screen.
You can use any of the options to show the first leg of your journey. The ProNav software will not show your entire
journey, just each leg at a time.
To start driving your first leg of your journey press the
„Drive‟
button and the ProNav software will calculate the
route to your first destination and commence navigation.
When you have reached your first destination, tap the Drive Screen to open the Drive Options Screen (see page
42
for more information)
and tap „ Stop Drive‟.
You will then be presented with a confirmation if you wish to go to the next leg of your journey.