manualshive.com logo in svg

PRONAR VMP-10, Manual, Page: 6 / 78

Share
Download
PRONAR VMP-10 Manual Download Page 6

4.5 COMPOUND 

FEED ANALYSIS....................................................................4.8 

4.6 FEEDING 

ANIMALS .....................................................................................4.9 

4.7 CLEANING....................................................................................................4.11 

4.8 DISCONNECTING 

FROM TRACTOR ..........................................................4.12 

4.9  TYRES – INSTRUCTIONS FOR USE ..........................................................4.12 

5 SERVICING INSTRUCTIONS 

5.1 

5.1  INSPECTING AND ADJUSTING WHEEL BEARINGS .................................5.2 

5.2 ADJUSTING 

MAIN BRAKE...........................................................................5.3 

5.3 ADJUSTING 

PARKING BRAKE ...................................................................5.5 

5.4 PNEUMATIC 

SYSTEM OPERATION ...........................................................5.6 

5.5 HYDRAULIC 

SYSTEM OPERATION ...........................................................5.7 

5.6 LUBRICATION..............................................................................................5.9 

5.7 REDUCTION 

GEAR 

HANDLING RULES .....................................................5.11 

5.8  ADJUSTING DRAUGHT BAR TO TRACTOR’S HOOK-TYPE COUPLING..5.13 

5.9 ADJUSTING 

MILLING BLADES ...................................................................5.15 

5.10 ENTERING THE TANK.................................................................................5.17 

5.11 CUTTING BLADES DISASSEMBLY.............................................................5.18 

5.12 ADJUSTING CUTTING BLADES POSITION................................................5.20 

5.13 SHARPENING CUTTING BLADES ..............................................................5.21 

5.14 STORAGE ....................................................................................................5.21 

5.15 SCREWING FORCE OF SCREW JOINTS...................................................5.22 

 

Summary of Contents for VMP-10















































































Reviews:

No comments