PRONAR VMP-10, Manual, Page: 42 / 78

4.4
•
performance of hydraulic system of shutters,
•
oil level in planetary gear lubrication system,
•
technical condition of telescopic-joint shaft, covers and securing chains,
•
lubricate elements according to instructions described in chapter „Lubrication points” in
compliance with service schedule.
CAUTION
It is forbidden to use nonopeartional feed car.
Pipes of braking pneumatic system are equipped with terminals, which protective plugs are
made of dyed plastic. Colours of those terminals correspond with plug-in sockets in tractor
(yellow, red or black). Pin of the pipe supplying hydraulic brakes ought to be connected to
brakes hydraulic socket in tractor.
In case of connecting pipes controlling servomotors responsible for lifting / lowering shutters,
one must exercise special care not to be mistaken and connect proper pairs of pipes.
CAUTION
Before setting any connections in the system, it is necessary to familiarize with the
content of technical manual of tractor and comply with recommendations contained
therein.
4.3 ACCOUPLING WITH TRACTOR
Before setting to accouple feed car with tractor, one must make sure whether it is
immobilized by means of parking brake. The machine may be aggregated only with tractors
equipped with lower or upper hook-type couplings that transfer vertical load of at least 12,7kN
(1270kg).
ATTENTION
When accoupling both machine no one must stand between feed car and tractor.