PRONAR PWP900, Operator'S Manual, Page: 60 / 74

PRONAR PWP900 SECTION 5
5.2
5.1 TECHNICAL INSPECTION
When preparing the tedder for normal use, check its individual components according to
guidelines presented in Table 5.1.
TABLE 5.1 TECHNICAL INSPECTION SCHEDULE
DESCRIPTION MAINTENANCE ACTIVITIES FREQUENCY
Check if the tedder is
correctly mounted on the
tractor's linkage
Check if correctly installed
Condition of safety guards
and frames
Check the technical condition of
safety guards and frames, if
complete and correctly mounted.
Check technical condition of
tyres and tyre pressure,
Check the condition of tyre tread,
lateral surfaces, wheel rim and if
necessary inflate the tyres up to
recommend pressure
Technical condition of the
tedder's hydraulic system
For details please refer to section
„5.4 HYDRAULIC SYSTEM
OPERATION”
Check lubricating oil level in
main transmission.
Check according to section „5.3
OPERATION OF MAIN
TRANSMISSION”
Check if all main nut and bolt
connections are properly
tightened
Torque values should be according
to Table 5.3
Correctness of mounting
tedding springtines to arms
and arms to rotor.
Ensure that springtines are correctly
tightened.
Lubrication
Lubricate elements according to
section „5.5 LUBRICATION”.
D
a
ily
b
e
fo
re
b
e
g
in
n
in
g
w
o
rk
Changing oil in main
transmission
Change oil according to section „5.3
MAINTENANCE OF MAIN
TRANSMISSION” After the first 50 h,
then every 500 h or
once a year
ATTENTION
Do NOT use unreliable rotary tedder.