PRONAR PWP900, Operator'S Manual, Page: 56 / 74

PRONAR PWP900 SECTION 4
4.18
When tedding along the field edge, the tilt of all the wheels should be properly set (FIGURE
4.9). When tedding along the right side field edge, all the wheels should be tilted to the right
(B), when tedding along the left side field edge, all the wheels should be tilted to the left (C).
When tedding in the middle of the field, all the wheels should set be in the central position
(A). Before setting the wheels, raise the machine to the minimum required height and take
out the pin (2) locking the wheel in the desired position.
When turning or reversing, disengage the tractor PTO drive and raise the tedder on the three
point linkage.