Promotech PRO 5 PB, Operator'S Manual

Page: 3 / 31

PRO 5 PB/PBE/PBC
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
3
1. GENERAL INFORMATION
1.1. Application
The PRO 5 PB / PBE / PBC is a pipe bevelling machine designed to mill edges of pipes
made of carbon and stainless steel, aluminum alloys, and copper-nickels. Depending
on the tool bit used, the machine can perform external bevelling, J-bevelling, internal
calibration, and facing pipes from inside diameters of 32 mm
(1.26’’)
to outside
diameters of 114 mm
(4.49’’). Up to three tool bits can be installed at the same time.
When equipped with an optional 140 mm spindle disk set the machine can bevel
pipes with outside diameters up to 140 mm, and using an optional 75 mm spindle disk,
ratchet wrench, or both, will facilitate working in places hard to reach. An optional small
expanding mandrel will allow machining pipes with internal diameters from 25 mm to
33 mm (0.98
–1.30’’).
1.2. Technical data
PRO 5 PB PRO 5 PBE PRO 5 PBC
Pressure 0.6 MPa (87 psi)
– –
Voltage
–
1~ 110
–120 V, 50–60 Hz
1~ 220
–240 V, 50–60 Hz
18 V DC, 5.2 Ah
Air motor
Modec
NT10RT0851FCA1F-CO
– –
Electric motor
–
Metabo BE1100
Metabo BS 18 LTX
Impuls
Connection
CEJN 410 DN 10.4
R
1/2’’ BSPT coupling
Electrical plug Battery connection
Air consumption 1400 Nl/min (50 CFM)
– –
Power 800 W 1100 W
–
Pipe diameter
32 mm ID to 114 mm
OD (1.26
–4.49’’)
32 mm ID to 114 mm
OD (1.26
–4.49’’)
32 mm ID to 114 mm
OD (1.26
–4.49’’)
Maximum pipe
wall thickness for
outside diameter
up to 114 mm
12 mm (0.47’’) 12 mm (0.47’’) 12 mm (0.47’’)
114
–124 mm*
10 mm (0.39’’) 10 mm (0.39’’) 10 mm (0.39’’)
124
–132 mm*
8 mm (0.31’’) 8 mm (0.31’’) 8 mm (0.31’’)
132
–140 mm*
6 mm (0.24’’) 6 mm (0.24’’) 6 mm (0.24’’)
Rotational speed without load 180 rpm
–
0
–50 rpm (gear 1)
0
–180 rpm (gear 2)
Nominal rotational speed 90 rpm
0
–90 rpm (gear 1)
0
–300 rpm (gear 2)
–
Protection class
–
II
–
Required ambient temperature
0
–40°C (34–104°F)
0
–40°C (34–104°F)
0
–40°C (34–104°F)
Weight with motor 10 kg (22 lbs) 11 kg (24 lbs)
10 kg (22 lbs),
includes battery
* Available with the optional 140 mm spindle disk set.