r
ear
p
anel
H
ardware
The rear panel of the VTrak J5000 features dual controllers for SFF-8644 SAS uplink connection (4 I/O ports
per controller), 1G network ports used for system monitoring, serial port management connection, two hot-
swappable power supplies, system cooling units, and power supply ON/OFF switches. For details about ports,
SAS
port
identificAtion
Please take a moment to note how the eight SAS ports are identified in the connection instructions that follow.
SAS ports are numbered 1 to 4, left to right, for each controller module, the controller modules are also numbered
left to right.
The SAS port furthest left is identified as Controller 1: Port 1.
The SAS port furthest right is identified as Controller 2: Port 4.
See
“Ports for in-band and out-of-band management connection on VTrak J5000 controller” on page 26
for
a closer look at the controller front panel.
VTrak J5800 front view
VTrak J5600 front view
VTrak J5800 rear view
PSU2
power insert
PSU1
power insert
PSU 2
ON/Off switch
PSU 1
ON/Off switch
Controller 1
Controller 2
7
12G SAS JBOD
User Guide
