M
anageMent
Via
ssh c
onnection
First get the IP address of the Management port via direct serial connection. Use the
net
command to learn
the IP settings set by DHCP, or to set a static IP address, then use SSH software to connect to the management
interface. See “net” on page 54
for syntax details about the CLI command,
net
.
To connect via SSH protocol, use the default user name and password (see below). You can change the
password after successfully connecting to the management interface. Use the
ssh_account
command to change
the password.
SSH default login settings:
User name:
administrator
Password:
password
cli c
onVentions
Commands and options are case sensitive.
Not all extended keys are supported. However, you can use the BACKSPACE and the left and right arrow keys
for command line editing. In addition, the up and down arrow keys allow scrolling through the command history
buffer.
44
VTrak J5000 Series
Promise Technology
