SuperTrak SX6000™ User Manual
Chapter 2
- 8 -
PAM utility. You must have an array on SuperTrak SX6000 in order to use the drives for
data storage. See Chapter 0, for more information about using the SuperBuild BIOS
utility to create an array.
Network Connections
SuperTrak SX6000 may be monitored over a network. The following topics require
attention during the configuration. If you will not be monitoring SuperTrak SX6000 via a
network, you may skip this particular section.
Please note that this is NOT intended as
a thorough networking/troubleshooting reference for LAN or WANs.
Firewall
For remote connection to a LAN on which a SuperTrak SX6000 Message
Server is installed, it is very possible that you may be required to
communicate through a firewall. To do this, you must have a communication
port open for the IP address on which the Message Server resides, or the IP
address must be fully open for communication.
The network administrator should either: a) open port 711 (decimal) on the IP
address; or, b) open all ports for the IP address. This will allow the PAM
software to initiate a TCP/IP connection from the remote location through the
firewall port 711 to the Message Server located at the destination IP.
TCP/IP
Proper TCP/IP setup is crucial for the SuperTrak SX6000 software package
to function correctly. Without TCP/IP installed and configured correctly, the
software will not be able to make connections to the SuperTrak SX6000
RAID server(s) for remote access and maintenance.
NOTE
: For further information on IP addressing, and TCP/IP configuration consult the
documentation for your specific operating system.
Summary of Contents for SuperTrak SX6000
