SuperSwap 4600 User Manual
2
Overview
The SuperSwap 4600 drive enclosure installs easily into three contiguous 5.25-
inch component bays in your personal computer or workstation.
SuperSwap 4600 drive carrier and enclosure extend the data storage capabilities
of your system by adding up to four additional 3.5-inch or 2.5-inch form factor
Serial ATA (SATA) disk drive or Serial Attached SCSI (SAS) disk drive to your
system.
SuperSwap 4600 also allows you to easily swap your disk drives in and out of
your computer, without the hassle of opening and closing your computer cabinet.
Figure 1. SuperSwap 4600 Front View
SuperSwap 4600 accepts only Serial ATA and SAS disk drives. It does not
support (Parallel) ATA or SCSI disk drives.
When used with Promise Technology Serial ATA RAID 0, 1, 5, or 10 products,
such as the FastTrak SX4300, SuperSwap 4600 allows you to hot-swap a failed
drive without powering down the system while fully protecting disk drive and
internal system components.
4600
Drive
Carriers
Status
LEDs