Promise Technology Smartstor NS4600 Product Manual Download

Page: 274 / 370

SmartStor NS4600 Product Manual

262

Enabling and Disabling the Buzzer

The SmartStor has a buzzer that sounds when the SmartStor is finished booting
and when a problem is detected. The buzzer is enabled by default.

Promise recommends that you leave the buzzer enabled.

To disable the buzzer:

Click the

Administration

topic and choose the

Management

icon to expand

the Tree.

In the Tree, click the

Buzzer&LED

icon.

Click the Buzzer setup tab and the

Disable

option button.

Click the

button.

In the confirmation box, click the

button.

Click the

Enable

option button, then click the

button to enable the buzzer,

then click the

button in the confirmation box.

Enabling and Disabling the LED

The LED Setup tab enables you to turn on or off the SmartStor LED and set the
time schedule.

To activate the LED:

Click the

Administration

topic and choose the

Management

icon to expand

the Tree.

In the Tree, click the

Buzzer&LED

icon.

Click the LED setup tab and the

Disable

option button.

Click the

Always ON

button.

Click the

button.

The LED is enabled.

Summary of Contents for Smartstor NS4600



















































































































































































































































































































































































Search results

Summary of Contents for Smartstor NS4600

Reviews:

Related manuals for Smartstor NS4600

Brands by name

Popular brands

Promise Technology Smartstor NS4600, Product Manual

Search results

Summary of Contents for Smartstor NS4600

Reviews:

Related manuals for Smartstor NS4600

Brands by name

Popular brands