Promise Technology PAM User Manual Download

Page: 17 / 84

Installation

Installation Procedure

Before you start

…

If you are installing PAM to run over a network, determine the computers
and servers onto which you will install PAM. Obtain the IP addresses of all
RAID PCs where PAM will be installed.

UltraTrak Users

The UltraTrak is an external enclosure and must be online during PAM
installation. Follow these steps before you install PAM:

1. With your UltraTrak powered down, attach a null modem cable to the

UltraTrak serial port connector and one of the COM ports on your RAID
PC.

PAM will automatically detect the UltraTrak during installation.

2. Power up the UltraTrak and wait for it to boot completely.

3. Proceed with the PAM installation.

………

PC with SuperTrak card,

Internal RAID array

PC with FastTrak card

PC with UltraTrak

RAID Subsystem

Figure 2-2. Three examples of RAID PCs.

PAM Installation

With that information ready, follow these steps to install PAM on each
computer or server:

1. Boot the PC/server and launch Windows.

If the computer is already running, exit all programs.

2. Within Windows, go to Start > Run.

Summary of Contents for PAM





















































































Search results

Summary of Contents for PAM

Reviews:

Related manuals for PAM

Brands by name

Popular brands

Promise Technology PAM, User Manual

Search results

Summary of Contents for PAM

Reviews:

Related manuals for PAM

Brands by name

Popular brands