VTrak Quick Start Guide
14
Checking Your Physical Drives
The configuration script only works when all of your physical drives are
unconfigured. If you are setting up your VTrak system for the first time, all of your
drives will be unconfigured.
To check your physical drives:
1.
In Tree View, click the VTrak
icon, Enclosures
icon, Enclosure
icon,
and Physical Drives
icon.
2.
Under the Information tab, check Operational Status and Configuration.
If Operational Status is
OK
and Configuration is
Unconfigured
, your
physical drives are ready to run the configuration script.
Figure 10.Physical drive information
If you have created any disk arrays, logical drives, or spare drives, you must
delete them before you run the script. Be sure you back-up your important data
first, then delete the disk arrays and logical drives. See the
VTrak Product
(User)
Manual
on the Software CD for instructions.
Summary of Contents for E610f
Page 18: ...VTrak Quick Start Guide 18...
