VTrak Quick Start Guide
10
To set up a serial connection with VTrak:
1.
On your Xserve, double-click the ZTerm desktop icon (right).
The Local window opens on the desktop.
2.
From the ZTerm dropdown menus, choose
Settings > Connection
.
Set the Data Rate to
115200
and click the
OK
button.
3.
Press Enter once to launch the CLI.
The CLI opens in the Local window. The prompt should look like this:
administrator@cli>
If you see a Login prompt, type
administrator
and press Enter.
Then at the Password prompt, type
password
and press Enter.
4.
Go to “Making Settings on VTrak” on page 11.
Mac Pro
Before you begin:
1.
Go to
http://homepage.mac.com/dalverson/zterm/
and download the ZTerm
terminal emulation software.
Install ZTerm onto your Mac Pro.
2.
Obtain a USB-to-DB9 adapter.
Install the software for the USB-to-DB9 adapter onto your Mac Pro.
Figure 8. An example of a USB-to-DB9 adapter
3.
Find the RJ11-to-DB9 serial cable ships with the VTrak.
Attach the RJ11 end of the serial cable to the RJ11 serial connector on one
of the VTrak controller modules. See Figure 3.
DB9 end
USB end
Summary of Contents for E610f
Page 18: ...VTrak Quick Start Guide 18...
