Identifier
Meaning
‘Metering
è
Discharge stroke
è
HV1’
metering profile has been set.
‘Metering
è
Discharge stroke
è
HV2’
metering profile has been set.
‘Metering
è
Discharge stroke
è
HV3’
metering profile has been set.
A dosing monitor "Flow Control" is connected.
A diaphragm rupture indicator is connected.
The pump is in the
‘Menu’
(Set up).
Further explanations can be found in the "Troubleshooting"
chapter.
The pump only shows the metering volume and the capacity
in the calibrated state in l or l/h or in gal or gal/h.
5.2.2 Key Functions
Key
Application
In the continuous displays
In the menu
[Back]
press
-
Move back to the previous menu
point (or a continuous display) -
without saving
Press
[STOP/
START]
press
Stop pump,
Stop pump,
Start pump
Start pump
[Menu]
press
Move to the menu
Move back to a continuous display
[Priming]
press
Priming
Priming
[Clickwheel]
press
Start batch (only in
‘Batch’
operating
mode)
Acknowledge errors
Move to next menu option (or a
continuous display)
Confirm entry and save
[Clickwheel]
turn
Switch between the continuous dis‐
plays
Change figure or change selection
Overview of Equipment and Control Elements
18
