manualshive.com logo in svg

ProMinent DULCOTEST DT4B, Operating Manual, Page: 15 / 40

Share
Download
ProMinent DULCOTEST DT4B Operating Manual Download Page 15

3 

Operating Menu

3.1  Operating Menu Options

Operating menu selection
1.

The device is switched off.

Press and hold down the

[MODE] key

2.

Use the 

[ON/OFF] key to switch

on the device

ð

3 decimal points appear in

the display.

3.

Release the 

[MODE] key

4.

The [!] key allows you to select

the following operating menu

items:

n

[diS] = read out of stored

data

n

Set date and time

n

User adjustment

ð

The selected operating

menu item is indicated by an

arrow in the display.

5.

Use the 

[!] key to select the  ‘Set

date and time’  operating menu

item (arrow at top right and

bottom left in the display)

Setting date and time (24-hour

format)

Increase the value to be set by

pressing the [MODE] key.
Lower the value to be set by

pressing the [ZERO/TEST] key.
Pressing the [!] key takes you to

the next value to be set.

1.

Press the 

[MODE] key

ð

The parameter to be set

appears for 2 seconds.

2.

Enter the year 

[YYYY]

3.

Enter the month 

[MM]

4.

Enter the day 

[dd]

5.

Enter the hour 

[hh]

6.

Enter the minutes 

[mm].

Enter the minutes in 10 minute

increments
Press the 

[!] key

Enter minutes in 1 minute incre‐

ments

7.

After setting the minutes, press

the 

[!] key

ð

[IS SET] appears in the dis‐

play and the device auto‐

matically returns to meas‐

uring mode.

Operating Menu

 

 

 

15

Summary of Contents for DULCOTEST DT4B









































Reviews:

No comments