ProMinent DULCOMETER D1C A D Series, Operating Instructions Manual, Page: 22 / 24

22
Possible values
Initial value Increment Lower value Upper value Remarks
Variable allocation as per identity Measured value
code Controlled variable If control applicable
Output range 0…20 mA 0…20 mA
4…20 mA
3.6/4-20 mA Reduction to 3.6 mA
when alarm relay switches
(not limit value violation)
Range measured
value
0–1 V 1 mV -2000 mV 2000 mV Minimum range 10 mV
Range controlled
variable
0 %…+100 % 1 % -100 % +100 % Minimum range 1 % of
measured value
General Setting
D1C2-028-GB
Access to all setting menus can be blocked with an access code !
general setting
information
ident-code: D1CA
software version
DxRxxxxxxxxxx
D1C-A1 FW-5.00
alarm relay
access c.:
=
=
operating menu:
active
5000
english
complete
pause normal
- active... closed
- alarm off
- td: 0 min
Standard Signal Output 2
D1C2-030-Redox-GB
Access to all setting menus can be blocked with an access code !
Control with standard signal
signal output 2
mA setting ?
Only with 2 standard signal outputs
signal output 2
mA
0…20 mA
control
positive oxide
regulated value:
negative reduc
signal output 2
0%
0 mA =
20 mA =
regulated value
100%
measured value
signal output 2
1000 mV
0 mA =
20 mA =
measured value
0 mV
Complete Operating Menu / Description
BA_DM_183_10_10_EN.p65 28.10.2010, 11:44 Uhr 22