manualshive.com logo in svg

ProMinent DULCOLyse, Original Operating Instructions, Page: 32 / 68

Share
Download
ProMinent DULCOLyse Original Operating Instructions Download Page 32

6 

Operation

n

User qualification, operation: instructed user 

Ä

 Chapter 2.2

‘User qualification’ on page 11

Switch the system on by turning the main switch to "1". The main

switch is on the control cabinet.

6.1  Touchscreen

An overview of information and the control options available on the

touchscreen are shown below.
You can use the touchscreen to:

n

Start or stop the entire system

n

Navigate from menu to menu.

n

View the variables to be measured.

n

Set different system parameters.

n

Check the levels of the tanks.

n

Acknowledge faults (

‘Reset’ ).

n

View the alarm list and delete if necessary.

MENU

Operating settings

Trends

Alarms

Operation

Status

HOME

Quantity produced during the previous week

System is stopped

ON / OFF

No alarms

Volume in 

supply tank

Vacuum

Time since the last 

production

Water flow

Electric power

pH value

Software version

No external enable signal

Tuesday

Wednesday

Thursday

Friday

B0658

Fig. 21: Construction of the touchscreen
The touchscreen is self-explanatory in terms of its construction and

the meaning of the operating fields.

Touchscreen

Operation

 

 

 

32

Summary of Contents for DULCOLyse





































































Reviews:

No comments