Page 8
Dulcodes UV-Desinfektionsanlage
4.1
Display
A graphic display is provided.
In operating mode
Display of operating status
Warnings are indicated by flashing arrows and messages
A flashing error message draws attention to faults.
In programming mode
Flashing indication of variable numerical values or data
IMPORTANT!
The display will revert to the normal display corresponding to the respective operating
status 5 minutes after the last time a key was pressed.
4.2
Function Keys
To switch the UV disinfection system ON and OFF
In operating mode:
Change display window
In programming mode:
Change adjustable parameters
Move one level back in menu
In programming mode:
Decrease an indicated numerical value
Change a data item
In programming mode:
Increase an indicated numerical value
Change a data item
In operating mode:
Change to programming mode
Acknowledge a fault
In programming mode:
Accept a set value or condition
IMPORTANT!
Press and hold the START/STOP key for at least 2 seconds.
The display will revert to the normal display corresponding to the respective operating
status 5 minutes after the last time a key was pressed.
Control
System
OFF
Graphic display
Function keys
START/STOP
CHANGE
BACK
DOWN
UP
ENTER
Fig. 1: Display and operator control unit
BA_DS_009_10_06_GB.p65
20.10.2006, 7:31 Uhr
8
