manualshive.com logo in svg

Prominence Home Liva 51016, Owner'S Manual, Page: 7 / 11

Share
Download
Prominence Home Liva 51016 Owner'S Manual Download Page 7

7

9-Pin Connector

Light Kit

Fitter Plate 

Screw

Fitter Plate

Motor Screw

Blade Arm

Canopy

Round 

Hole

Mounting

Bracket Screw

J-shaped Slot

ASSEMBLY INSTRUCTIONS

9

11

10

12

9. Raise the canopy, ensure the two mounting bracket 

screws are aligned with the J-shaped slots in the canopy. 

Then turn the canopy in a clockwise direction until the 

mounting bracket screws are completely engaged in 

the J-shaped slots. Install the two previously removed 

mounting bracket screws in the round holes. Securely 

tighten all four mounting bracket screws.

Blade Screw

Blade 

Washer

Blade Arm

Blade

Screw Cap

10. Insert the blade screws along with the blade washers 

through the blade arm and the blade and secure with a 

screw cap. Repeat this step for the remaining blades and 

blade arms.

11. Secure the blade arm to the top side of the motor 

using the previously removed motor screws. Completely 

secure each blade arm to motor before moving to the 

next.

12. Remove the three fitter plate screws from the fitter 

plate. Connect the 9-pin connector from the fan to the 

9-pin connector in the light kit.  Then, lift the light kit 

over the fitter plate and secure using the three previously 

removed fitter plate screws.

Summary of Contents for Liva 51016












Reviews:

No comments