Canopy
Mounting Bracket
Screws
Mounting Bracket
Motor Screw
Motor
5
ASSEMBLY INSTRUCTIONS
3
2
1
1. Turn
OFF
the electrical power at the main fuse or circuit
breaker.
3. Remove the eight Phillips-head motor screws from the
top of the motor. Set screws aside for later use.
4
2. Remove the mounting bracket by removing the two
mounting bracket screws from the round holes in the
canopy. Then loosen the other two mounting bracket
screws from the J-shaped slots. Retain the mounting
bracket screws for later. Install the mounting bracket
to the outlet box (not included) using the screws and
washers provided with the outlet box.
Warning:
To reduce the risk of fire electric shock,
or personal injury, mount to the outlet box marked
“acceptable for fan support” and use the mounting
screws and washers provided with the outlet box.
Yoke
Set Screw
Downrod
Downrod Clip
Downrod Pin
Motor
4. Remove the downrod clip and downrod pin from the
downrod. Then partially loosen the two set screws in the
yoke at the top of the motor.
Summary of Contents for Liva 51016
Page 1: ......