Prominence Home Liva 51016 Owner'S Manual Download Page 11

LIMITED LIFETIME WARRANTY

Model Name: 48” Civa Ceiling Fan

Model No:       51016 - Chrome

11

To obtain Service, please contact the Service Department:

1-877-706-3267, 9 a.m.- 5 p.m. Central time.

The manufacturer warrants this fan to be free from defects in workmanship and materials present at time 

of shipment from the factory for a lifetime from the date of purchase by the original purchaser. The retailer 

also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in 

workmanship and material at the time of shipment from the factory for a period of one year after the date 

of purchase by the original purchaser. The manufacturer agrees to correct such defects without charge or 

at its option replace the ceiling fan with a comparable or superior model.

To obtain warranty service, present a copy of the receipt as proof of purchase. All costs of removing and 

reinstalling the product are your responsibility. Any damage to any part such as by accident or misuse 

or improper installation or by affixing any accessories, is not covered by this warranty. The manufacturer 

assumes no responsibility whatsoever for fan installation during the limited lifetime warranty. Any service 

performed by an unauthorized person will render the warranty invalid.

Due to varying climate conditions, this warranty does not cover any changes in brass finish, including 

rusting, pitting, corroding, tarnishing or peeling. Brass finishes of this type give their longest useful life 

when protected from varying weather conditions. Any glass provided with this fan is not covered by the 

warranty.

Any replacement of defective parts from the ceiling fan must be reported within the first year from 

the date of purchase. For the balance of the warranty, call our customer service department for return 

authorization and shipping instructions so that we may repair or replace the ceiling fan. Any fan or parts 

returned improperly is the sole responsibility of the purchaser. There is no other expressed warranty. The 

manufacturer disclaims any and all warranties. The duration of any implied warranty which cannot be 

disclaimed is limited to the time period as specified in the expressed warranty. The manufacturer shall not 

be liable for incidental, consequential, or special damages arising out of or in connection with product 

use or performance except as may otherwise be accorded by law. This warranty gives specific legal rights, 

and you may also have other rights which vary from state to state.

This warranty supersedes all prior warranties.

Note:

 A small amount of “wobble” is normal and should not be considered a defect

.

Summary of Contents for Liva 51016












Reviews: