3 - 10
Adjustment
10.Forward/Reverse Adjustment of the Super Stitch Feeding
• The stitch length of both the forward and the reverse feeds should be the same.
1
Attach a J presser foot, lower the presser lever, and attach a cover.
2
Turn the selection dial to select the triple zigzag stitching.
3
Set a piece of paper and turn the pulley to check the needle down condition.
4
Loosen the screw (Screw, pan M3
×
8) within the selection dial. (Lower left screw)
5
Turn the screw with a screw driver to adjust feed amount of both the forward and reverse feeds.
6
Loosen the screw (Screw, pan M3
×
8) within the selection dial. (Lower left screw)
7
Set a piece of paper and turn the pulley to check the needle down condition.
www.promelectroavtomat.ru
