3 - 1
In
s
p
ect
ion and
Ad
ju
s
tme
n
t
1. Adjustment of the Timing Belt Tension
• When pulling on the middle portion of the timing belt with a force of 3 N (300 g), there should be a slack of
3 to 4 mm.
1
Loosen the screw (Screw, pan (S/P washer) M 4
×
8 DA) fastening the tension pulley holder.
2
Adjust the belt tension by moving the tension pulley holder up or down.
3
Tighten the screw (Screw, pan (S/P washer) M 4
×
8 DA) to secure the tension pulley holder.
4
Check the timing belt tension again.
3 - 4 mm
Screw, pan (S/P washer) M4 × 8DA
Tension pulley holder
Tension guage
3N(300g)
Adjustment
www.promelectroavtomat.ru
