2 - 1
Disassembly Procedure
1. Remove the needle plate B and take out the inner rotary hook.
2. Remove the one screw securing the face plate and then remove the face plate to the front.
3. Pull out the selection dial on the front face of the front cover.
4. Remove the screws fastening the front cover, one in the front (giza tite 5
×
16) and six in the back (five giza
tite M 5
×
16, and one giza tite M 3
×
32), to remove the front cover.
5. Remove the two screws (taptite, bind B M 4
×
12) to remove the thread tension dial assembly.
6. Remove the one screw (taptite, bind B M 4
×
12) to remove the thread conductor B assembly.
7. Pull out the reverse stitching knob.
4
2
2
3
1
4
4
4
4
4
4
7
4
5
5
5
6
6
Disassembly Procedure
www.promelectroavtomat.ru
