Promax OD-405, Manual, Page: 152 / 218

USER’S MANUAL. OD-405/410B/411/415
11-2011 Page 36
5.1.3 Run / Stop the trigger
In the trigger Run mode the oscilloscope constantly searchers for a
trigger condition an updates the signal into the display when the condition is
met.
In the trigger Stop mode, the oscilloscope stops triggering and these the
lass acquired waveforms stay in the display. The trigger icon at the top of the
display changes into
Stop mode.
Pressing the Trigger Run / Stop key switches between the Run and
Stop mode.
Figure 7.-
Waveform
Operation
Waveforms can be moved or scaled in both the Run and
Stop mode.
5.1.4 Horizontal scale and position
5.1.4.1 Horizontal Position
The horizontal position knob [9] moves the waveform left or right. The
position indicator moves along the waveform and the distance from the center
point is displayed as the offset in the upper side of the display.