12
Sealing 1 : You can increase or decrease sealing value by pressing
or
button
with Sealing 1 lamp lighting(The sealing time is from 0.1 to 10 Sec). After setting the
best value, to press SHIFT button for saving value and move it to next function.
Note:
The best sealing time is around 2~4 sec, it is depends on the thickness of the
vacuum pouch. The value of sealing is equal to the sealing temperature. Too low or
too high the value will make the vacuum pouch be pulled apart very easily by hand or
there will be a burnt mark appearance.
Sealing 2 : If your machine equip with different length of seal bar like L type seal bar. You
can have separate sealing time control for each seal bar to obtain best seal quality.
Note: Sealing 2 is design for customer who has different length of sealing bar. If the
machine has the same sealing bar then, please timed the same sealing time for sealing
1 and sealing 2 to obtain best seal quality.
Soft air (optional): You can increase or decrease soft air time by pressing
or
button with Soft air lamp lighting(The soft air time is from 0.1 to 10 Sec). After setting the
best value, press SHIFT button for saving value and move it to next function.
Cooling : You can increase or decrease Cooling time by pressing
or
button with
Cooling lamp lighting(The Cooling time is from 0.1 to 10 Sec). After setting the best
value, press SHIFT button for saving value and move it to next function.
Summary of Contents for TC-420
