PROLiNK PRC3801 User Manual Download

Page: 66 / 92

PROLiNK® PRC3801

Wireless AC1200 MU-MIMO Dual-Band Gigabit Router

•

Whole System Flood SYN

: Check the box to enable. If enable, when the number of the current

SYN packets is beyond the set value, the router will startup the blocking function immediately.

•

Whole System Flood FIN

: Check the box to enable. If enable, when the number of the current

FIN packets is beyond the set value, the router will startup the blocking function immediately.

•

Whole System Flood UDP

: Check the box to enable. If enable, when the number of the current

UPD-FLOOD packets is beyond the set value, the router will startup the blocking function
immediately.

•

Whole System Flood ICMP

: Check the box to enable. If enable, when the number of the

current ICMP-FLOOD packets is beyond the set value, the router will startup the blocking
function immediately.

•

Per-Source IP Flood SYN

: Check the box to enable. When the IP Flood SYN Detection is

enabled, the router has the ability to block malicious devices that are attempting to flood
devices.

•

Per-Source IP Flood FIN

: Check the box to enable. When the IP Flood FIN Detection is

enabled, the router has the ability to block malicious devices that are attempting to flood
devices.

•

Per-Source IP Flood UDP

: Check the box to enable. When the IP Flood UDP Detection is

enabled, the router has the ability to block malicious devices that are attempting to flood
devices.

•

Per-Source IP Flood ICMP

: Check the box to enable. When the IP Flood IGMP Detection is

enabled, the router has the ability to block malicious devices that are attempting to flood
devices.

•

TCP/UDP PortScan

: Check the box wil l block against hackers from probe to router system

remotely and determine what TCP/UDP port are open.

•

ICMP Smurf

: Check box to enable protection against ICMP Smurf attack.

•

IP Land

: Check the box to enable the protection against LAND attack

•

IP Spoof

: Check box to enable protection against IP Spoofing attack on device within network.

•

IP TearDrop

: Check box to enable protection against Teardrop attack that targeting on TCP/IP

fragmentation reassembly codes.

Summary of Contents for PRC3801





























































































Search results

Summary of Contents for PRC3801

Reviews:

Related manuals for PRC3801

Brands by name

Popular brands

PROLiNK PRC3801, User Manual

Search results

Summary of Contents for PRC3801

Reviews:

Related manuals for PRC3801

Brands by name

Popular brands