PROLiNK® PRC3801
Wireless AC1200 MU-MIMO Dual-Band Gigabit Router
4.28 Static Route
Go to
Management → Static
Route to enter the configuration page. Static Route page allow you to
define custom routes allowing to be directed to a specific client or location.
•
Enable Static Route
: Enable or disable Static Route function.
•
IP Address
: Enter IP address of packet that will take route.
•
Subnet Mask
: Enter the netmask of the route.
•
Gateway
: Enter hop gateway to be taken if this route is used.
•
Metric
: The route metric is a value from 1 to 16 that indicates the cost of using this route.
•
Interface
: Select the interface that the IP packet must use to transmit out of the router when this
route is used.
•
Show Route Table
: Table of network route on the network.
72
