19
ARCLED7507QZOOM
fixtures from different generations.
DIMX
•
Enter
DIMX
to select dimmer mode and dimmer speed. When dimmer is set to
OFF,
the RGBW and
MASTER DIMMER are linear. The Dim1/2/3/4 are speed modes of the non linear dimmer,
DIM1
is the
faster, while
DIM4
is the slowest.
NOTE - The factory default setting is
DIM4
.
DERR
Enter to
DERR
to control in case of DMX signal errors.
-
SAVE
saves the latest data DMX on error DMX signal.
-
BLAK
allows you to activate the mode on error DMX blackout.
SLCK
Select the function
SLCK
, to lock the setup menu. When
SLCK
is set to
ON
, the user is required to enter the
password (UP + DOWN + UP + DOWN) to access the setup menu.
ZOOM
Select the
ZOOM
function to calibrate the zoom to the location
POS1
and
POS2
. Select
BASE
to the default
position of the zoom.
3.16 CALIBRATION FUNCTION
Press the button MENU to enter the password confirmation, to enter the correct password
UP+DOWN+UP+DOWN button, press the MENU in the correct password will enter show submenu.
WHITE SETTING
Enter the
CAL
mode to select white color of different color temperature;
•
Press the button MENU then press the button UP/DOWN so many times until show
CAL1
. Press the
button ENTER to confirm.
•
There are 11 pre-programmed white colors (
WHITE01 - WHITE11
) can be edited by using red, green,
blue, white (
RED - GREEN - BLUE - WHITE
).
•
Set the value (
000 - 255
), through the buttons UP/DOWN.
WHITE BALANCE
Enter the
CAL2
mode to adjust the RGB parameter to make different whites.
•
Press the button MENU so many times until show
CAL2
and press the button ENTER to confirm.
•
Select red, green or blue (
RED - GREEN -BLUE
), through the button UP/DOWN. Press the button ENTER
to confirm.
•
Set the value
000 - 255
, through the button UP/DOWN.
•
When the new setting is activated, the DMX controller choose RGB=255, 255, 255 the write color will
be made by actual RGB values on the
CAL2
.
3.17 ZOOM FUNCTION
Select the
ZOOM
range
POS.1
and
POS.2
set the small position for the zoom function.
NOTE - That when using DMX to control the fixture, the user will only be able to access up to the set ZOOM
position. It is not possible to adjust beyond the set position.
Summary of Contents for ARCLED7507QZOOM
