ARCLED7507QZOOM
18
3.13 STATIC CONFIGURATION
To set the custom balance of red, blue, green and white:
•
Press the button MENU, then press the button UP/DOWN so many times until the display shows
STAT
.
Press the button ENTER to confirm.
•
Select the color red, green, blue or white
(RED - GREN -BLUE - WHITE)
through the buttons UP/DOWN and
then press the button ENTER.
•
Set the value
(000 - 255)
, through the buttons UP/DOWN.
•
Set the value of the
ZOOM
and
STRB
between
(0 - 255)
and
(0 - 20Hz)
respectively through the buttons UP/
DOWN.
3.14 EDITING CUSTOM PROGRAMS
To set the custom balance of red, blue, green and white:
•
Press the button MENU, then press the button UP/DOWN so many times until the display shows
EDIT
.
Press the button ENTER to confirm.
•
Select the program
PR.01 - PR.10
.
•
Each custom program has 30 steps that can be edited.
•
Each step allows the creation of a scene using red
(RED)
, green
(GREEN)
, blue
(BLUE)
, white
(WHITE),
strobe
(STRB)
, time
(TIME)
and fade
(FADE)
.
•
Set the value
(000 - 255)
, through the buttons UP/DOWN.
3.15 SPECIAL FUNCTIONS
Press the button MENU and select through the directional buttons the
SET
mode; and press the button
ENTER to confirm.
NOTE - The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
It is possible to view to following functions:
KEY
Enter the KEY mode to select whether the access password is on or off.
•
Press the button MENU so many times until show
KEY
and press the button ENTER to confirm.
•
Select
ON
or
OFF
.
When the fixture is set as pass
ON,
after 30 seconds or turn on the fixture next time, the fixture will need
an access password to enter the display menu control.
NOTE - The factory access password is UP + DOWN + UP + DOWN. Press ENTER to confirm the access.
UPLD
•
Select
UPLD
to upload the custom programs from the current Master unit to the Slave units.
•
In order to activate the upload function the password must be entered. Password is the same as the
main access password.
REST
•
In order to reset custom modesto default values select
REST
.
COLR
COLR
is for activate/deactivate the color calibration functions.
- When
RGBW
is selected, on RGB =255, 255, 255 the color is displayed as calibrated in CAL2 (RGBW).
- When
COLOR
is set
OFF,
on RGB =255, 255, 255 the RGB values are not adjusted and the output is most
powerful.
- When
UC
is selected, the RGB output adjusted to a standard preset universal color which balances
Summary of Contents for ARCLED7507QZOOM
